Ready to Ship


All Transmissions Include:

Enter the Information below

1996 GMC Sierra 1500 Transmission 4 Speed Automatic

1996 GMC Sierra 1500 Transmission 4 Speed Automatic

The transmission is a vital part of your 1996 GMC Sierra 1500. This is especially true if you have noticed intermittent hard shifts and bogging. This is a problem caused by the torque converter clutch applying during a shift. To diagnose this problem, you'll need to disassemble the truck and check the wiring harness from the transmission case connector to the rear of the engine on the driver's side. The TCC solenoid and pressure control solenoid wires can also be frayed along the seam of the body. This will need to be repaired and repositioned.

A reliable transmission repair shop will be able to diagnose the problem accurately. A transmission repair center can connect your truck to a computer and determine the transmission's condition using diagnostic trouble codes and visual inspection. This is the most reliable and quickest way to fix a malfunctioning transmission. A reputable technician will also be able to recommend the best repair option for your vehicle. After inspecting your car, it's time to replace the transmission.

The GMC Sierra 1500 transmission is an eight-speed automatic. The transmission supports a 12,000-pound trailering rating and comes with a 6.2-liter V-8 engine. You'll be able to use this truck for hauling and transporting goods, and it will not overheat or run out of gas. Whether you're towing or pulling a trailer, your new GMC Sierra 1500 transmission will keep you moving.

The GMC Sierra 1500's transmission was rebuilt in 1996. While it's not uncommon for the unit to be prone to breakdowns, you should have it inspected before deciding on a new transmission. It may be time to replace the entire transmission. The replacement process can be a lengthy one. Ensure that you do this only after you have checked all other components of the vehicle.

The transmission of the 1996 GMC Sierra 1500 is an eight-speed automatic. Its 6.2-liter V-8 engine is capable of producing 420 horsepower and 460 lb-ft of torque. This transmission also supports a 12,000-pound trailering rating. This means that you'll need to spend money on a new transmission. If you're unsure of which one to get, consult with a certified auto mechanic before attempting a swap.

If you're experiencing a harsh gear change, you should consider replacing the transmission. This particular part of the transmission needs to be replaced every one to be repaired properly. If this is not possible, the manufacturer has released TSB PIP4051C to address the problem. It is a good idea to get a replacement transmission if the vehicle is overdue. The new one will last a lot longer than the original, and if the factory design flaws are addressed, it should be more durable.

1996 GMC Sierra 1500 Transmission 4 Speed Automatic