Ready to Ship


All Transmissions Include:

Enter the Information below

Ford Ranger Automatic Transmission Fluid Change

Ford Ranger Automatic Transmission Fluid Change

There are a few important things to remember before you start the process of ford ranger automatic transmission fluid change. It's important to first remove the oil pan. Clean the oil pan thoroughly with a rag. Discard the old oil pan gasket. Install the new oil filter screen. Replace the old oil filter screen with the new one. Secure all seals and gaskets with retaining screws. After installing the new filter screen, start the engine. Let the engine warm up and reach normal operating temperature before removing the old filter.

Before you start the process of changing the transmission fluid, make sure your car is warm. Changing the transmission fluid will ensure that the engine stays lubricated and runs smoothly. You should remove the drain pan. If you're changing a manual transmission, you should disconnect the oil cooler line. Then, remove the old filter and remove it. Be sure to check the level of the new filter. Once the filter is removed, you can install the new one.

Changing the transmission fluid in a Ford Ranger is essential to ensure optimal performance. If your vehicle is older, it may be time to replace the transmission fluid. Typically, it takes about an hour to change the transmission fluid. Before attempting the job, make sure the transmission fluid is warm and the drain pan is loose. If it's cold, remove the old filter and the oil cooler line. Then, take the engine apart from the engine to access the fluid.

In some cases, changing the transmission fluid may be the only way to keep your Ford Ranger transmission in top condition. In other cases, it's better to have a mechanic replace the entire transmission if you suspect a problem. In most cases, it's a simple job that takes only a few minutes. However, if you're using the manual to change the fluid, it's best to contact a professional auto repair shop.

You can check the fluid level of your Ford Ranger transmission by following the manufacturer's instructions. There are several things to consider when you're changing the transmission fluid. If you're not familiar with how to do this, read the owner's manual carefully and get a professional to do it for you. By following these tips, you'll be able to avoid costly repairs. Your car's automatic trans will benefit from it.

The most common signs that your Ford Ranger automatic transmission needs to be changed include strange noises and smells. Some other signs you should consider are gear catching and delayed shifting. A warning light will indicate if it's time to have your 2019 Ranger's transmission fluid replaced. It's important to change the fluid regularly to avoid expensive damage. It's crucial that you take care of any problems early.

Ford Ranger Automatic Transmission Fluid Change