Ready to Ship

TRANSMISSION AUTOMATIC

All Transmissions Include:

Do You Need a TRANSMISSION AUTOMATIC ?
Enter the Information below

GMC 4 Speed Automatic Transmission

GMC 4 Speed Automatic Transmission

The 4-speed automatic transmission in your GMC may be having problems shifting into higher gears. You may have trouble shifting from second gear to third gear, or from 2nd gear to fourth. Other transmission problems include having difficulty shifting from reverse to first gear. The most common problem is a faulty engagement piston and a worn clutch pack. To solve these issues, you will need to replace the clutch pack and engagement piston.

The GM four-speed automatic is available in two models: light-duty 700R4/4L60E used in cars and half-ton trucks; and heavy-duty 4L80E used in SUVs. The light-duty model has the lowest first gear, at 3.06, and widest ratio changes, but these compromise performance. If your transmission has one of these issues, consider replacing the clutch.

A malfunctioning throttle position sensor may also be to blame. If your transmission is unable to shift into gear, it could be due to a faulty throttle position sensor. A faulty throttle position sensor will send incorrect data to the transmission control unit, or TCU, and will trigger a check engine light. Most diagnostic tools can easily diagnose this issue, and you can get the best deal by repairing the problem.

In order to diagnose the problem, you must have a GMC OBD-II transmission scanner. Your car must have an OBD-II transmission scanner. A basic code reader won't be able to read the codes. It will also not work if your vehicle has a P0700 code. The P0741 code is a warning that your transmission may be experiencing a failure.

A malfunctioning torque converter clutch regulator valve can cause a check engine light and fault code P1870. The torque converter is located inside the valve body and is prone to wear and tear. If you notice these symptoms, you should contact a technician right away. A faulty torque converter may also lead to an intermittent or constant check engine light. A faulty throttle position sensor can also cause electrical glitches and jamming, which will also trigger the check engine light. If you suspect a faulty throttle position sensor, you should replace it.

A GMC vehicle with a 4-speed automatic transmission may have a gear-shifting problem. The transmission may take too long to change gears, or it may even fail to downshift while driving. This problem may also result in a check engine light. Luckily, most of these problems are simple to diagnose and repair with the proper tool. If you're concerned about a faulty throttle position sensor, you can use a simple GM OBD-II Transmission Scanner. If you do have a basic code reader, you might not be able to read all the codes.

A malfunctioning transmission may cause your vehicle to shift out of park, or be stuck in one gear. A check engine light can indicate a malfunction. Besides these, another problem is the lack of fluid in the transmission. It can also lead to a failure of the clutch, resulting in a poor driving experience. While this is a rare occurrence, it should not be overlooked. If the problem persists, you should consult with a GMC dealership for an expert diagnosis.

GMC 4 Speed Automatic Transmission